Sektion Medizinische Werkstoffkunde und Technologie
Ohne Forschung kein Fortschritt

Veröffentlichungen (ab 2013)

2020

Reymus M, Spintzyk S, Liebermann A Stawarczyk B. Discoloration behaviour of four CAD/CAD resin composites: Influence of different food solutions. IJP (submitted) (2020).

Mutschler M, Wahl E, Spintzyk S. CAD/Cast Anwendungen in der Dentaltechnik. Quintessenz Zahntechnik (accepted) (2020).

Kretschmer C, Krämer Fernandez P, Wahl E, Kuscu E, Unkovskiy A, Xepapadeas, A B, Mutschler M, Spintzyk S. Erfahrungen aus der Praxis – Anwendungen von generativen Fertigungsverfahren bei der Patientenversorgung. Quintessenz Zahntechnik (submitted) (2020).

Krämer Fernandez P, Kuscu E, Weise H, Engel E M, Spintzyk S. Rapid manufacturing a digital obturator prosthesis based on intraoral scanner and additive manufacturing – a dental technique. JPD (submitted) (2020).

Unkovskiy A, Wahl E, Hüttig F, Keutel C, Spintzyk S. Multi-material 3D printing of a definitive silicone auricular prosthesis: An improved technique. JPD (submitted) (2020).

Xepapadeas AB, Weise C, Frank K, Spintzyk S, Poets CF, Wiechers C, Arand J, Koos B. Technical Note on introducing a digital workflow for newborns with craniofacial anomalies based on intraoral scans - Part I: 3D printed and milled palatal stimulation plate for Trisomy 21. BMC Oral Health (in press) (2020).

Klein C, Krespach M, Spintzyk S, Wolff D, von Ohle C, Meller C. The fluorescence of restorative CAD/CAM materials available in dentistry: a comparison of the properties of resin-based composites and ceramics. Dental Materials (submitted) (2020).

Frank K, Weise C, Xepapadeas AB, Spintzyk S, Koos B. Intraoral scanning of newborns and infants with craniofacial disorders: A retrospective evaluation of scan time and protocol. Angle Orthodontist (submitted) (2020).

Xu Y, Schille C, Schweizer E, Hüttig F, Geis-Gerstorfer J, Spintzyk S. Peel bond strength between 3D printing tray materials and elastomeric impression/aAdhesive systems: A laboratory study. Dental Materials (minor revision) (2020).

Xu Y, Xepapadeas A B, Koos B, Li P, Geis-Gerstorfer J, Spintzyk S. How does the post-rinsing time influence the mechanical strength and cytotoxicity of the SLA printed polymethacrylate for dental application. Dental Materials (submitted) (2020).

Schweitzer F, Klink A, Geis-Gerstorfer J, Spintzyk S, Huettig F. Influence of minor extended firing on dimensional, optical, and mechanical properties of crystalized zirconia-reinforced lithium silicate glass ceramic. Journal of Mechanical Behavior of Biomedical Materials (in press). https://doi.org/10.1016/j.jmbbm.2020.103644

Sawada T, Schille C, Schweizer E, Geis-Gerstorfer J. Bond strength of commercial veneering porcelain to experimental cast Ti-Cr alloy. Dental Materials Journal (in press) (2020).

Younis M, Unkovskiy A, ElAyouti A, Geis-Gerstorfer J, Spintzyk S. The effect of various plasma gases on the shear bond strength between unfilled polyetheretherketone (PEEK) and veneering composite following artificial aging. Materials 12(9): 1447 (2019). https://doi.org/10.3390/ma12091447

 

2019  

Wiedenmann F, Liebermann A, Spintzyk S, Eichberger M, Stawarczyk B. Influence of different cleaning procedures on tensile bond strength between zirconia abutment and titanium base. The International Journal of Oral & Maxillofacial Implants 34(6): 1318-1327 (2019). https://doi.org/10.11607/jomi.7638

Xepapadeas AB, Klein N, Weise C, Frank K, Arand J, Wiechers C, Poets CF, Koos B, Spintzyk S. Digitaler Workflow zur Herstellung von Gaumenabdeckplatten. Quintessenz Zahntechnik 45(10): 1242-1250.

Mutschler M, Zyll IM, Geis-Gerstorfer J, Edelmann K, Krause J, Bünemann J, Pederzani N, Schmitt U, Mertens J, Lagaris A, Ebert R, Spintzyk S. Direct Metal Laser Melting versus dentaler Feinguss. Quintessenz Zahntechnik 45(8): 1000-1008 (2019).

Younis M, Unkovskiy A, ElAyouti A, Geis-Gerstorfer J, Spintzyk S. The effect of various plasma gases on the shear bond strength between unfilled PEEK and veneering composite following artificial aging. Materials 12(9), 1447 (2019). https://doi.org/10.3390/ma12091447

Stawarczyk B, Brauneis M, Langwieder B, Spintzyk S, Eichberger M, Liebermann A. Two-body wear, surface roughness, and Martens hardness parameters as well as optical properties of indirect veneering resin composites after different aging regimes. Dental Materials Journal (resubmitted).

Unkovskiy A, Wahl E, Zander AT, Huettig F, Spintzyk S. Intraoral scanning to fabricate complete dentures with functional borders: a proof-of-concept case report. BMC Oral Health 19, 46: (2019). https://doi.org/10.1186/s12903-019-0733-5

Li P, Schille C, Schweizer E, Kimmerle-Müller E, Rupp F, Heiss A, Legner C, Klotz UE, Geis-Gerstorfer J, Scheideler L. Selection of extraction medium influences cytotoxicity of zinc and its alloys. Acta Biomaterialia 98, 235-45 (2019). https://doi.org/10.1016/j.actbio.2019.03.013

Unkovskiy A, Brom J, Spintzyk S, Keutel C, Geis-Gerstorfer J, Roehler A, Huettig F. Simplifying the digital workflow of facial prostheses manufacturing using a three-dimensional (3D) database: setup, development, and aspects of virtual data validation for reproduction. Journal of Prosthodontic Research 63(3): 313-320 (2019). https://doi.org/10.1016/j.jpor.2019.01.004

Kuscu E, Wahl E, Klink A, Hüttig F, Spintzyk S. Scan to cast – von der digitalen Abformung zur gegossenen Goldrestauration. Quintessenz Zahntechnik 45(1):78-86 (2019).

Han X, Yang D, Yang C, Spintzyk S, Scheideler L, Li P, Li D, Geis-Gerstorfer J, Rupp F. Carbon fiber reinforced PEEK composites based on 3D-printing technology for orthopedic and dental applications. Journal of Clinical Medicine 8(2): 240, 1-17 (2019). https://doi.org/10.3390/jcm8020240

Unkovskiy A, Spintzyk S, Axmann D, Engel EM, Weber H, Huettig F. Additive manufacturing: A comparative analysis of dimensional accuracy and skin texture reproduction of auricular prostheses replicas. J Prosthodont 28(2): e460-e468 (2019). https://doi.org/10.1111/jopr.12681

Xu Z, Coriand L, Loeffler R, Geis-Gerstorfer J, Zhou Y, Scheideler L, Fleischer M, Gehring F, Rupp F. Saliva-coated titanium biosensor detects specific bacterial adhesion and bactericide caused mass loading at cell death. Biosensors & Bioelectronics 15(129): 198-207 (2019). https://doi.org/10.1016/j.bios.2019.01.035

Sawada T, Wagner V, Schille, Ch, Spintzyk, S, Schweizer, E, Geis-Gerstorfer, J. Effect of slow-cooling protocol on biaxial flexural strengths of bilayered porcelain-ceria-stabilized zirconia/alumina nanocomposite (Ce-TZP/A) disks. Dental Materials 35(2): 270-282 (2019). https://doi.org/10.1016/j.dental.2018.11.024

Liebermann A, Spintzyk S, Reymus M, Schweizer E, Stawarczyk B. Nine prophylactic polishing pastes: impact on discoloration, gloss, and surface properties of a CAD/CAM resin composite. Clin Oral Investig 23(1): 327-335 (2019). https://doi.org/10.1007/s00784-018-2440-z

Wünsche M, Schillinger C, Mittelbach A, Geis-Gerstorfer J, Prokop G. Electrochemical Impedance Spectroscopy and Corrosion Point Counting on Metal Sheet Edges with Different Cathodic Dip Coat Materials. Materials and Corrosion 70(6) 1026-1035 (2019). https://doi.org/10.1002/maco.201810392           

Mutschler M, Hüttig F, Xepapadeas A, Zylla I, Geis-Gerstorfer J, Spintzyk S. Herausnehmbarer Zahnersatz auf Basis von 3-D-gedrucktem Polyamid-12 (PA-12) Untersuchung von Oberflächenbeschaffenheit und Glanzwert bei Valplast®-Prothesen. Quintessenz Zahntechnik 45(3): 302-313 (2019).

Han X, Sharma N, Xu Z, Scheideler L, Geis-Gerstorfer J, Rupp F, Thieringer FM, Spintzyk S. An In Vitro Study of Osteoblast Response on Fused-Filament Fabrication 3D Printed PEEK for Dental and Cranio-Maxillofacial Implants. Journal of Clinical Medicine 8: 771 (2019). https://www.mdpi.com/2077-0383/8/6/771 (2019)

Li P, Zhang W, Dai J, Xepapadeas AB, Schweizer E, Alexander D, Scheideler L, Zhou C, Zhang H, Wan , Geis-Gerstorfer J (2019): Investigation of zinc-copper alloys as potential materials for craniomaxillofacial osteosynthesis implants. Materials Science and Engineering C 103 (2019). https://doi.org/10.1016/j.msec.2019.109826

Li P, Dai J, Schweizer E, Rupp F, Heiss A, Klotz UE, Geis-Gerstorfer J, Scheideler L, Alexander D. Response of Human Periosteal Cells to Degradation Products of Zinc and Its Alloy. Materials Science and Engineering C 108, 110208 (2019). https://doi.org/10.1016/j.msec.2019.110208

Li P, Schille C, Schweizer E, Kimmerle-Müller E, Rupp F, Han X, Heiss A, Richter A, Legner C, Klotz UE, Geis-Gerstorfer J, Scheideler L. Evaluation of a Zn–2Ag–1.8Au–0.2V Alloy for Absorbable Biocompatible Materials. Materials 2020 13(1): 56 (2019). https://doi.org:10.3390/ma13010056

Younis M, Unkovskiy A, ElAyouti A, Geis-Gerstorfer J, Spintzyk S. The Effect of Various Plasma Gases on the Shear Bond Strength between Unfilled Polyetheretherketone (PEEK) and Veneering Composite Following Artificial Aging. Materials 2019 12(9): 1447 (2019). https://doi.org/10.3390/ma12091447

Maulana I. Grindability analysis of dental core build-up materials under clinically relevant test procedure. Journal of Medical Materials and Technologies 1(1): 1-21 (2017). https://doi.org/10.24354/medmat.v1i1.12

 

2018

Gehrke P, Jaladi N, Spintzyk S, Fischer C, Scheideler L, Geis-Gerstorfer J. Rupp F. Einfluss unterschiedlicher Reinigungsverfahren auf die Biokompatibilität von Titan-, Zirkonoxid- und PEEK-Abutmentmaterialien. Quintessenz 69(12): 1432-1440 (2018).

Han X, Sawada T, Schille C, Schweizer E, Scheideler L, Geis-Gerstorfer J, Spintzyk S. Comparative analysis of mechanical properties and metal-ceramic bond strength of Co-Cr base-alloy dental restorations fabricated by different manufacturing processes. Materials 2018 11(10): 1801 (2018). https://doi.org/10.3390/ma11101801

Liang L, Krieg P, Rupp F, Kimmerle Müller E, Spintzyk S, Richter M, Richter G, Killinger A, Geis-Gerstorfer J, Scheideler L. Osteoblast response to different UVA-activated anatase implant coatings. Advanced Materials Interfaces 6(4): 1801720 (2019). https://doi.org/10.1002/admi.201801720

Li P, Schille C, Schweizer E, Rupp F, Heiss A, Legner C, Klotz UE, Geis-Gerstorfer J, Scheideler L. Mechanical characteristics, in vitro degradation, cytotoxicity, and antibacterial evaluation of Zn-4.0Ag alloy as a biodegradable material. International Journal of Molecular Sciences 19(3): 755 (2018). https://doi.org/10.3390/ijms19030755

Xu Y, Unkovskiy A, Klaue F, Rupp F, Geis-Gerstorfer J, Spinntzyk S. Compatibility of a silicone impression/adhesive system to FDM-printed tray materials - a laboratory peel-off study. Materials 11(10): 1905 (2018). https://doi.org/10.3390/ma11101905

Hüttig F, Chekani U, Klink, A, Said F, Rupp F. A modified shark-fin test simulating the single-step/double-mix technique: a comparison of three groups of elastomers. Dental Materials Journal 37(3): 414-421 (2018). https://doi.org/10.4012/dmj.2017-013

Spintzyk S, Unkovskiy A, Elteste T, Koos B, ElAyouti A, Huettig F, Geis-Gerstorfer J. Additive manufacturing processes - application in dental technology: today and tomorrow (in German). Zahntechnik Magazin (ZTM) 22(4): 261-270 (2018).

Sawada T, Schille C, Wagner V, Spintzyk S, Schweizer E, Geis-Gerstorfer J. Biaxial flexural strength of the bilayered disk composed of ceria-stabilized zirconia/aluminana nanocomposite (Ce-TZP/A) and veneering porcelain. Dental Materials 34(8): 1199-1210 (2018). https://doi.org/10.1016/j.dental.2018.05.003

Gehrke P, Sing T, Fischer C, Spintzyk S, Geis-Gerstorfer J. Comparison of marginal and internal adaptation of CAD/CAM manufactured hybrid abutment assemblies after central and local manufacturing. Int J Oral Maxillofac Implants 33(4): 808-814 (2018). https://doi.org/10.11607/jomi.6131

Taha D, Spintzyk S, Schille Ch, Wahsh M, Sabet A, Salah T, Geis-Gerstorfer, J. Fracture resistance and failure modes of polymer infiltrated ceramic endocrown restorations with variations in margin design and occlusal thickness. Journal of Prosthodontic Research 62(3): 293–297 (2018). https://doi.org/10.1016/j.jpor.2017.11.003

Sawada T, Schille C, Zoeldfoeldi J, Schweizer E, Geis-Gerstorfer J, Spintzyk, S. Influence of a surface conditioner to pre-sintered zirconia on the biaxial flexural strength and phase transformation. Dental Materials 34(3): 486-493 (2018). https://doi.org/10.1016/j.dental.2017.12.004

Li P, Schille C, Schweizer E, Rupp F, Heiss A, Legner C, Klotz U, Geis-Gerstorfer, J, Scheideler L. Mechanical characteristics, in vitro degradation, cytotoxicity, and antibacterial evaluation of Zn-4.0Ag alloy as a biodegradable material. International Journal of Molecular Sciences 19(3): 755 (2018). https://doi.org/10.3390/ijms19030755

Unkovskiy A, Bui HB, Schille C, Geis-Gerstorfer J, Hüttig F, Spintzyk S. Objects build orientation, positioning, and curing influence dimensional accuracy and flexural properties of stereolithographically printed resin. Dental Materials 34(12): e324-e333 (2018). https://doi.org/10.1016/j.dental.2018.09.011

Taha D, Spintzyk S, Sabet A, Wahsh M, Salah T. Assessment of marginal adaptation and fracture resistance of endocrown restorations utilizing different machinable blocks subjected to thermomechanical aging. J Esthet Restor Dent 30(4): 319-328 (2018). https://doi.org/10.1111/jerd.12396

Rupp F, Liang L, Geis-Gerstorfer J, Scheideler L, Hüttig F. Surface characteristics of dental implants: A review. Dental Materials, 34(1): 40-57 (2018). https://doi.org/10.1016/j.dental.2017.09.007

Unkovskiy A, Spintzyk S, Brom J, Hüttig F, Keutel C. Direct 3D printing of silicone facial prostheses: A preliminary experience in digital workflow. J Prosthet Dent 120(2): 303-308 (2018). https://doi.org/10.1016/j.prosdent.2017.11.007

Hüttig F, Unkovskiy A, Keutel C, Brom J, Geis-Gerstorfer J, Spintzyk S. Neue Möglichkeiten zur Herstellung von Gesichtsprothesen (Epithesen): Ein Stand der Dinge aus der Universität. Zahntech Mag 22(8): 514-521 (2018).

Xepapadeas A, Hüttig F, Örtel A F, Peters K, Geis-Gerstorfer J, Koos B, Spintzyk S. Biegefestigkeit eines additiv verarbeitbaren Schienenmaterials nach Wasserlagerung und verlängerter Reinigungszeit in Isopropanol. Die Quintessenz 69(12): 1442-1448 (2018).

Liebermann A, Spintzyk S, Stawarczyk B. Politur von CAD/CAM Kunststoffen. Quintessenz ZT 44(11): 1480-1489 (2018).

 

2017

Tendulkar G, Sreekumar V, Rupp F, Teotia AK, Athanasopulu K, Kemker R, Buck Jr. A, Kaps HP, Geis-Gerstorfer J, Kumar A, Nüsler AK. Characterisation of porous knitted titanium for replacement of intervertebral disc nucleus pulposus. Scientific Reports 7: 16611 (2017). https://doi.org/10.1038/s41598-017-16863-8

Kournetas N, Spintzyk S, Schweizer E, Sawada T, Said F, Schmid P, Geis-Gerstorfer J, Eliades G, Rupp F. Comparative evaluation of topographical data of dental implant surfaces applying optical interferometry and scanning electron microscopy. Dental Materials 33(8): e317-e327 (2017). https://doi.org/10.1016/j.dental.2017.04.020

Kister F, Specht O, Warkentin M, Geis-Gerstorfer J, Rupp F. Peri-implantitis cleaning instrumentation influences the integrity of photoactive nanocoatings. Dental Materials 33(2): e69-e78 (2017). https://doi.org/10.1016/j.dental.2016.10.002

Sawada T, Schille C, Spintzyk S, Wagner V, Schweizer E, Geis-Gerstorfer J. Biaxial flexural strength of bilayered commercial porcelain/Ce-TZP/A disks. Dental Materials 34(8): 1199-1210 (2017). https://doi.org/10.1016/j.dental.2018.05.003

Alqahtani W, Schille C, Spintzyk S, Alqahtani M, Engel E, Geis-Gerstorfer J, Rupp, F, Scheideler L. Effect of surface modification of zirconia on cell adhesion, metabolic activity and proliferation of human osteoblasts. Biomedical Engineering / Biomedizinische Technik 62(1): 75-87 (2017). https://doi.org/10.1515/bmt-2015-0139

Sawada T, Schille C, Almadani A, Geis-Gerstorfer J. Fretting corrosion behavior of experimental Ti-20Cr compared to titanium. Materials 10(2): 194 (2017). https://doi.org/10.3390/ma10020194

Reinbold J, Uhde AK, Müller I, Weindl T, Geis-Gerstorfer J, Schlensak C, Wendel HP, Krajewski S. Preventing Surgical Site Infections Using a Natural, Biodegradable, Antibacterial Coating on Surgical Sutures. Molecules 22(9): 1570 (2017). https://doi.org/10.3390/molecules22091570

Hüttig F, Kustermann A, Kuscu E, Geis-Gerstorfer J, Spintzyk S. Polishability and wear resistance of splint material for oral appliances produced with conventional, subtractive, and additive manufacturing. J Mech Behav Biomed Mater 2017 75: 175-179 (2017). https://doi.org/10.1016/j.jmbbm.2017.07.019

Hüttig F, Keitel JP, Prutscher A, Spintzyk S, Klink A. Fixed dental prostheses and single-tooth crowns based on ceria-stabilized tetragonal zirconia/alumina nanocomposite frameworks: Outcome after 2 years in a clinical trial. Int J Prosthodont 30(5): 461–464 (2017). https://doi.org/10.11607/ijp.5116

Schille C, Schweizer E, Geis-Gerstorfer J. Corrosion behavior of dental CoCr alloys made by different digital workflow processes compared to cast CoCr alloys. Journal of Medical Materials and Technologies 1(2): 1-4 (2017). https://doi.org/10.24354/medmat.v1i1.9

Kuttig J, Bui HB, Unkovskiy A, Schille C, Geis-Gerstorfer J, Spintzyk S. Mechanical properties of 3D printed water-soluble polyvinyl alcohol for maxillofacial prostheses prototypes. Medical Materials and Technologies 1(2): 8-10 (2017). https://doi.org/10.24354/medmat.v1i2.14

 

2016

Wu Y, Geis-Gerstorfer J, Scheideler L, Rupp F. Photocatalytic antibacterial effects on TiO2-anatase upon UV-A and UV-A/VIS threshold irradiation. Biofouling 32(5), 583-595 (2016). https://doi.org/10.1080/08927014.2016

Sawada T, Spintzyk S, Schille C, Zöldföldi J, Paterakis A, Schweizer E, Stephan I, Rupp F, Geis-Gerstorfer J. Influence of Pre-Sintered Zirconia Surface Conditioning on Shear Bond Strength to Resin Cement. Materials 9(7): E518 (2016). https://doi.org/10.3390/ma9070518

Stoll H, Steinle H, Stang K, Kunnakattu S, Scheideler L, Neumann B, Kurz J, Degenkolbe I, Perle N, Schlensak C, Wendel HP, Avci-Adali M. Generation of large-scale DNA-hydrogels with excellent blood and cell compatibility. Macromol Biosci 17(4): 1600252 (2016). https://doi.org/10.1002/mabi.201600252

Al Qahtani WMS, Schille C, Spintzyk S, Al Qahtani MSA., Engel E, Geis-Gerstorfer J, Rupp F, Scheideler L. Effect of surface modification of zirconia on cell adhesion, metabolic activity and proliferation of human osteoblasts. Biomedical Engineering / Biomedizinische Technik 62(1), 75-87 (2016). https://doi.org/10.1515/bmt-2015-0139

Sawada T, Spintzyk S, Schille C, Schweizer E, Scheideler L, Geis-Gerstorfer J. Influence of different framework designs on the fracture properties of ceria-stabilized tetragonal zirconia/alumina based all-ceramic crowns. Materials 9(5): 339 (2016). https://doi.org/10.3390/ma9050339

Al Bakkar H, Spintzyk S, Schille C, Schweizer E, Geis-Gerstorfer J, Rupp F. Influence of a bonding agent on the bond strength between a dental Co-Cr alloy and nine different veneering porcelains. Biomedical Engineering / Biomedizinische Technik 61(5): 509-517 (2016). https://doi.org/10.1515/bmt-2015-0101

Spintzyk S, Yamaguchi K, Sawada T, Schille C, Schweizer E, Ozeki M, Geis-Gerstorfer J. Influence of the conditioning method for pre-sintered zirconia on the shear bond strength of bilayered porcelain/zirconia. Materials 9(9): 765 (2016). https://doi.org/10.3390/ma9090765

Kister F, Specht O, Warkentin M, Geis-Gerstorfer J, Rupp F. Peri-implantitis cleaning instrumentation influences the integrity of photoactive nanocoatings. Dental Materials 33(2): e69-e78 (2016). https://doi.org/10.1016/j.dental.2016.10.002

 

2015

Ardjomandi N, Henrich A, Huth J., Klein C, Schweizer E, Scheideler L, Rupp F, Reinert S, Alexander D. Coating of ß-tricalcium phosphate scaffolds - a comparison between graphene oxide and poly-lactic-co-glycolic acid. Biomedical Materials 10(4): 045018 (2015). https://doi.org/10.1088/1748-6041/10/4/045018

Al Qahtani MSA, Wu Y, Spintzyk S, Krieg P, Killinger A, Schweizer E, Stephan I, Scheideler L, Geis-Gerstorfer J, Rupp F. UV-A and UV-C light induced hydrophilization of dental implants. Dental Materials 31(8), e157-e167 (2015). https://doi.org/10.1016/j.dental.2015.04.011

Wu Y, Klostermann H, Geis-Gerstorfer J, Scheideler L, Rupp F. Photocatalytic effects of reactively sputtered N-doped anatase upon irradiation at UV-A and UV-A/VIS threshold wavelengths. Surface & Coatings Technology 272: 337-342 (2015). https://doi.org/10.1016/j.surfcoat.2015.03.045

 

2014

Rupp F, Gittens RA, Scheideler L, Marmur A, Boyan BD, Schwartz Z, Geis-Gerstorfer J. A review on the wettability of dental implant surfaces I: Theoretical and experimental aspects. Acta Biomater 10(7): 2894-2906 (2014). https://doi.org/10.1016/j.actbio.2014.02.040

Gittens RA, Scheideler L, Rupp F, Hyzy SL, Geis-Gerstorfer J, Schwartz Z, Boyan BD. A review on the wettability of dental implant surfaces II: Biological and clinical aspects. Acta Biomater 10(7): 2907-2918 (2014). https://doi.org/10.1016/j.actbio.2014.03.032

Krajewski S, Rheinländer J, Ries P, Canjuga D, Mack C, Scheideler L, Schäffer TE, Geis-Gerstorfer J, Wendel HP, Rupp Frank. Bacterial interactions with proteins and cells relevant to the development of life-threatening endocarditis studied by use of a quartz-crystal microbalance. Anal Bioanal Chem 406(14): 3395-3406 (2014). https://doi.org/10.1007/s00216-014-7769-9

Niederländer J, Walter M, Krajewski S, Schweizer E, Post M, Schille C, Geis-Gerstorfer J, Wendel HP. Cytocompatibility evaluation of different biodegradable magnesium alloys with human mesenchymal stem cells. J Mater Sci Mater Med 25(3): 835-843 (2014). https://doi.org/10.1007/s10856-013-5119-7

Reindl A, Borowsky R Hein SB, Geis-Gerstorfer J, Imgrund P, Petzoldt F. Degradation behavior of novel Fe/ß-TCP composites produced by powder injection molding for cortical bone replacement. Journal of Materials Science 49(24): 8234–8243 (2014). https://doi.org/10.1007/s10853-014-8532-5

Schille C, Schweizer E, Baumeister J, Poulsen T, Geis-Gerstorfer J. Influence of Sol-Gel coatings on the corrosion behaviour of MgZn1 foams with 30 % porosity. Biomed Tech 59(S1): S20-S24 (2014).

Kopp S, Behrend D, Specht O, Trostmann D, Rosentritt M, Ottl P, Geis-Gerstorfer J, Warkentin M. Materialographic Examination of Three Different Types of Failed Dental Implants. Pract Metallogr 51(2): 127-154 (2014). https://doi.org/10.3139/147.110223

 

2013

Scheideler L, Füger C, Schille C, Rupp F, Wendel HP, Hort N, Reichel,HP, Geis-Gerstorfer J. Comparison of different in vitro tests for biocompatibility screening of Mg alloys. Acta Biomater, 9(10): 8740-8745 (2013). https://doi.org/10.1016/j.actbio.2013.02.020

Niederländer J, Rudi P, Schweizer E, Post M, Schille Ch, Krajewski S, Wendel HP, Geis-Gerstorfer J. Cytocompatibility of magnesium alloys with adult human endothelial cells. Emerging Material Research 2(5): 274-282 (2013). https://doi.org/10.1680/emr.13.00014

Schille C, Hausch G, Schweizer E, Geis-Gerstorfer J. Influence of a pre-passivation on the corrosion behavior of the CoCr dental alloy "Bear-Light". (in German). Fortschritte der Metallographie, Deutscher Verband für Materialforschung und -prüfung 315-320 Inventum GmbH (2013).

Kontos L, Schille C, Schweizer E, Geis-Gerstorfer J. Influence of surface treatment on the wear of solid zirconia. Acta Odontol Scand 71(3-4): 482-487 (2013). https://doi.org/10.3109/00016357.2012.696690

Geis-Gerstorfer J Problems in the clinical processing of ceramic restorations and the effects on the stability. (in German), ZWR ̶ Das Deutsche Zahnärzteblatt, 122(9): 420-431 (2013).

Gittens RA, Olivares-Navarrete R, Cheng A, Anderson DM, McLachlan T, Stephan I, Geis-Gerstorfer J, Sandhage KH, Fedorov AG, Rupp F. Boyan, Barbara D. Tannenbaum R, Schwartz Z. The roles of titanium surface micro/nanotopography and wettability on the differential response of human osteoblast lineage cells. Acta Biomater 9(4): 6268-6277 (2013). https://doi.org/10.1016/j.actbio.2012.12.002